AV67A THIN-LINE III heavy mill duty modular magnetic encoders fit 6.75" C-Face flanges typically found on Baldor Reliance motors. Other THIN-LINE III models, ranging from 115mm to 8.5", are available to fit other motor sizes.
THIN-LINE III encoders feature simple installation, durable construction, and clear diagnostics to eliminate encoder-related downtime:
First, the magnetic sensors are fully potted, to withstand dirt and liquids. No glass disks, no optics to clog. There are no moving, wearing parts!
The patented Wide-Gap Cam Screw Rotors put an end to sensor damage, are simpler to install, and stay securely mounted to the shaft.
The universal 5-24V design drives longer cables and is protected against wiring errors and surges.
When you power up an AV67A, you know you installed it right: the green light tells you the digital self-tuning has set your AV67A optimally.
If at any time, the AV67A cannot produce ideal signals, the light changes to red, and the remote alarm contact activates. However, the encoder keeps working to give you time to schedule service. Any time there are wiring errors, the LED changes to orange.
With a real-world installation history of over 4,500,000 hour MTBF, AV67A encoders will keep your machine running 24/7/365!
Operating Power: Volts: 5 - 24 VDC; Current: 100mA, no load
Output Format: A Quad B with Marker (A, /A, B, /B, Z, /Z)
Frequency Range:
@5, @1m cable, 250 kHz Max
@24V, @300m cable, #8 output, 45 kHz Max
Max. Instantaneous Current Output: 3000 mA
PPR: 4 - 50000
Speed: 5400 RPM Max. std., for higher speeds, consult factory
Electronics: Fully Encapsulated, IP67
Temperature: -40° to 100°C (150°C rotor)
Vibration: 18 gÂ’s
Shock: 1 meter drop test
Chemical: Polyurethane enamel paint protects against salt spray, mild acids, and bases.
Weight: 2-3 lbs (0.9 kg to 1.36 kg)
- Replaces Avtron M67, Northstar/Dynapar™ RL67, S6; online cross reference guide available
- Shrugs off dirt, oil, and water contamination
- Highly resistant to electrical and magnetic motor and brake noise
- If damaged, electronics can be replaced without removing rotor
- Patented Cam Screw Rotor™ eliminates rotor slipping
- Built-in motor position guide and diagnostic check
- No air gap adjustment required
- Corrosion-resistant coating on all metal surfaces
-
Second C-Face included for outboard brake/acc
Avtron's AV67 encoders directly replace competitive models, including:
Lakeshore/Northstar: RL67, S6
And other 
Industry | Mining | General | Wind Power | Pulp & Paper | Oil & Gas | Marine | Metals | Machinery | Crane & Hoist |
---|---|---|---|---|---|---|---|---|---|
Light Mill DutyHS4 Encoder Programming Tool Cables and Connectors Encoder Couplings RUSH AV4 AV25 HS25A AV6A HS6A K661 AV6M AV4 HS35A AV20 |
|
||||||||
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No Related Materials Available
Competitive Products
-
Avtron's AV67 encoders directly replace competitive models, including:
Lakeshore/Northstar: RL67, S6
And other 6.75" C-face mount encoder models desiged to fit on ABB/Baldor/Reliance RPM AC and RPM DC motors.
For direct model replacements, try our cross reference page
or