Product Details

HS44

The Ideal Wind Generator Encoder!

Simple Installation
Up to 10000 PPR
Replaces Competitive Models without Rewiring
High Power Outputs Standard
-40°C to +100°C Operation
Fully Insulated from Motor Shaft Currents
2 Year No-Hassle Warranty
No fragile optics, no glass disks
Cast aluminum heavy duty housing
UL Listed; CE Compliant

CONFIGURE & PRICE ENCODER

Product Manual

Data sheet

Accessories

3D View

Description

The HS44 offers high performance, magnetic durability and moisture resistance in a compact package with drop-in ease of replacement at a great value.

Avtron HS44 encoders are a direct fit for 12mm, 16mm and 17mm (10:1 taper) generator (and motor) center-bolt shaft systems.

The isolated bearings offer high voltage isolation from shaft currents.

The HS44 is engineered to be a drop-in replacement for Baumer Hubner HOG 8, & 9 models, as well as Leine & Linde 861, 862 & 865 models. And it adds superior durability and diagnostics!

Avtron encoders have superior shaft seals and bearings that stay sealed to keep out contamination caused by temperature cycling and liquid sprays.

The HS44 offers high power outputs that can drive cables up to 1000’ [300m] with full short circuit and over-voltage protection!

On-board diagnostics check all aspects of the encoder - from the sensor to the output line driver circuit - and provide a clear indicator that the encoder is working well. No more fumbling with a PC or oscilloscope to determine if your encoder is working properly!

Often, optical encoders fail because of dust or water contamination that prevents the sensor from seeing the optical disk. The HS44 advanced magnetic technology sees through contamination. The magnetic technology in circuit board that works through humidity, oil, dust and dirt. This ensures your machine keeps working, even in the toughest application environments.

Select an Avtron HS44 and upgrade your machine today!

Specifications

Operating Power: Volts: 6-30 VDC; Current: 80mA, no load

Output Format: A Quad B with marker (A, /A, B, /B, Z, /Z)

Frequency Range: 0 to 250 kHz @6V & 1m cable

PPR: 64 - 10000 standard (for other PPR needs, consult factory)

Speed: 6000 RPM Max., (for higher speeds, consult factory)

Temperature: -30° to 85°C std, *optional: -40° to 100°C

Environmental: IP66 housing

Shaft Current Isolation: 2700VRMS

Vibration: 10-2000Hz, 17Gs

Shock: 275G, 6ms duration

Axial Bearing Load: 500 N

Radial Bearing Load: 1200 N

Weight: 2.5 lbs. [635 g] approx

Certifications: CE, UL Fire & Safety

More Advantages

All digital design; no adjustments or potentiometers required
Direct replacement for Hubner HOG 8 & 9 and, Leine & Linde 861, 862, 865, and many others
Fits European and Asian generators & motors with 12mm & 16mm straight and 17mm taper shaft center-bolt systems
Diagnostic LED & alarm output contact option
Grounding (earthing) strap and custom length Anti-Rotation Arms available
Fits all major brands and platforms of wind powered generators (WPGs)

Markets & Applications

Industry	Mining	General	Wind Power	Pulp & Paper	Oil & Gas	Marine	Metals	Machinery	Crane & Hoist
Light Mill Duty HS4 Encoder Programming Tool Cables and Connectors Encoder Couplings RUSH AV4 AV25 HS25A AV6A HS6A K661 AV6M AV4 HS35A AV20
Mill Duty M185 Cables and Connectors Encoder Couplings AV32 HS35M HS6M K661 M3 HS35X
Heavy Mill Duty XRB3 AVSK Cables and Connectors AV56S XR45 AV44 AV45 AV56A XR5 XR12 AV85A HS45 K661 XP5 XR115 XR125 XR4F XR56A XR850 XR85A AV115 AV125 AV67A HS44 AV850 SMT1
Severe Mill Duty XRB3 Cables and Connectors Encoder Couplings AV5 AV30 XR5 AV12 XR12 HS40 K661 M6C XP5 XPH1 XPH8 XR485 XR685 M7 AV685 AV485 AV30B

Baumer Hubner HOG 86, HOG 9, HOG 10
LeineLinde 861, 862, 865
and many other European and Asian encoder models.

Accessories

Cables and Connectors

PRODUCT GLOSSARY

A Quad B

A Quad B refers to the set of output quadrature signals from an incremental quadrature encoder to indicate speed and direction, including complements: A, A NOT, B, B NOT (, , , ). Most Avtron encoders offer A Quad B output at no extra cost. For more information on quadrature- Wikipedia: http://en.wikipedia.org/wiki/Quadrature_phase
Accuracy

Encoder accuracy is the ability of�or limit to the encoder to repeat the exact same signals, given the exact same mechanical position.� Accuracy and resolution may be independent--an encoder can have higher accuracy than resolution, and vice versa.� Avtron incremental encoders are typically accuracy rated at +/-1 count of their resolution; Avtron absolute encoder accuracy varies by model.
Anti-Rotation Arm

A device used to prevent hollow shaft encoders from spinning with the shaft rotation. It is also called a tether or a torque arm. To prevent encoder bearing damage, anti-rotation arms are very flexible and permit all movements, including axial shaft movement but not rotation.
Complements

Also known as complementary outputs. To ensure that signal noise does not cause errors between the encoder and the controller, many encoders output signals that are driven in exactly opposite directions: when A goes high, A NOT goes low (, ); when A goes low, A NOT goes high. Controllers which see a transition in A, but not in the A NOT signal, would report a quadrature error.
Encoder

A device which indicates position and speed via a set of digital outputs. Incremental encoders output quadrature (A Quad B) signals, and may add a marker pulse once per revolution. Absolute encoders typically indicate position via a digital message, a set of parallel outputs, or analog values.
Heavy Mill Duty

Heavy Mill Duty encoders are designed to withstand temperature cycling, extreme temperatures, contaminants, bearing loads, and physical force.
Hollow Shaft

Hollow Shaft encoders mount by passing the shaft of the motor into or through the encoder. Hollow shaft encoders are easy to mount and replace but are vulnerable to damage. Also, the weight of the encoder must be considered for small motor shafts < 0.75" diameter. Avtron offers a full range of hollow shaft encoders, including: AV685, HS25A, HS35A, HS35M, M3, M4, M6, M7, XP45.
Incremental Encoder

An encoder that produces pulses in proportion to distance moved or rotated. Incremental encoders can also have a marker pulse Z, Z NOT (, ) once per revolution to provide a position reference. Avtron produces a full range of incremental rotary encoders.
Line Driver

The chip or output circuit that forms the electrical pulses output from the encoder. Avtron has extremely advanced line driver technology to prevent damage from overvoltage and short circuits. Avtron offers optional high-power line drivers to permit Avtron encoder signals to travel farther down long wires to remote controller/drive locations without the need for repeaters or amplifiers.
MR

Magnetoresistive (MR) sensors are used in Avtron encoders to provide high accuracy and superior reliability versus optical sensing systems. For more information on magnetoresistivity: Wiki: http://en.wikipedia.org/wiki/Magnetoresistive
Magnetic Encoder

Magnetic and magnetoresistive encoders typically use a magnetized rotor with north and south poles lined up around the perimeter of the disk. A magnetoresistive sensor detects the transitions, and these are the counts or pulses generated by the encoder. Magnetic encoders withstand dirt, dust, water, and temperature changes far better than optical encoders.
Magnetoresistive Sensor

A sensor that detects the magnetic poles on an encoder's magnetic rotor and transforms them into pulses. Avtron magnetoresistive (MR) sensors use advanced technology to reject external magnetic signals such as brake solenoids and motor magnetic fields. MR sensors enable Avtron magnetic encoders to ignore dirt, oil, water, and other contaminants.
Marker Pulse

The Marker Pulse occurs once per revolution. The purpose of the marker pulse is to provide a repeatable home position location for positioning applications. The marker pulse is often abbreviated as "�Z" or "Z" in the USA and "C" or "N" in Europe.
Motor Shaft Currents

The high-speed switching of variable frequency drives that is used to control the speed of motors often produces current which flows from the motor shaft to ground, or from end-to-end of the motor. These current are highly destructive to both motor and encoder bearings. Preventing shaft current damage is essential. Most Avtron hollow shaft encoders include features to prevent motor shaft current damage. For more information: http://www.avtronencoders.com/knowledge-base/eliminating-damage-from-motor-shaft-currents-through-tachometers-and-encoders or visit Wikipedia: http://en.wikipedia.org/wiki/Shaft_voltage
Optical Disk

An Optical Disk is typically a glass, metal, or plastic disk with fine lines or slots etched around the perimeter that interrupt the beam of light from the light source to an optical sensor. Optical disks can be quite fragile. Avtron uses only shatterproof optical disks with Wide-Gap technology.
Optical Encoder

An Optical Encoder typically uses a light source shining through, or reflecting off, an optical disk with lines or slots that interrupt the beam of light to an optical sensor. Electronics count the interruptions of the beam and generate the encoder�s output pulses.
Optical Sensors

Optical Sensors are typically phototransistors or other light sensors which sense the light emitted by the light source, as interrupted by, or passed through, the optical disk.
PPR

Pulses Per Revolution. Most Avtron encoders output quadrature pulses, with four times as many lines as pulses. Often lines can be counted in the drive/speed controller for higher resolution applications.
Pulses

Pulses are also known as counts and are the low voltage output transitions which indicate movement of the encoder. Encoders are rated by resolution or PPR (pulses per revolution). Pulses are not the same as lines.
Quadrature

To determine which direction an encoder is revolving, encoders output quadrature signals: two streams of pulses, A & B, generated at 90� timing angles. (Also called A Quad B) A leading B indicates rotation in one direction; B leading A indicates the encoder is rotating in the opposite direction. Example: �A leads B with clockwise rotation as viewed from the encoder face on an HS45 encoder." Many encoders with quadrature outputs also have complementary outputs: A NOT and B NOT signals.
Quadrature Errors

Failures of the encoder to generate properly formatted quadrature signals. Most typically, these are failures to create the proper 90� signal separation between the A and B channel outputs, with a less than perfect stream of square waves. Most controllers, when presented with a quadrature error, will report a drive fault or encoder fault and then shut down.
Resolution

Resolution describes how many individual slices or positions can be reported by an incremental or absolute encoder. For incremental encoders the number of PPR (pulses per revolution) expresses resolution; for absolute encoders, PPR, or counts per turn or bits of resolution may be listed.
Rotary Encoder

A rotary encoder provides position and/or speed feedback information about a rotating shaft. Rotary encoders may be hollow shaft, no-bearing modular, coupled solid shaft style. They may provide absolute positioning information, or incremental velocity feedback. Avtron rotary encoders are designed and built to be far more reliable than ordinary rotary encoders. Avtron encoder white papers on our blog provide more details of how and why Avtron rotary encoders are more reliable.
Stub Shaft

The portion of the shaft (often on the non-drive end of the motor) used to mount an encoder. To add an encoder to a motor or other shaft that lacks enough extra shaft length to install the encoder, an additional shaft length is added. The stub shaft is threaded into the center of the motor shaft, or the existing motor shaft is enclosed in a sleeve that grips the shaft. Avtron offers many standard and custom stub shafts.
T.I.R.

Total Indicated Runout. This is a measurement of how much a shaft wobbles with each revolution (shaft runout).
Torque Arm

A type of anti-rotation arm used to mount hollow shaft encoders to large frame motors. It features a threaded rod for adjustable radius.
Twisted Pair Cable

Incremental and absolute encoder signals should be carried over twisted pair cables. Twisted pair cables enable the elimination of external noise signals, as the signals show up as "common mode" noise on both wires in the pair. The controller wired for differential communication will remove the external noise from the encoder signal. When wiring Avtron incremental encoders, be sure to wire the complementary signals (ex: A, A/) in one twisted pair. Do not mix phased signals (ex: A, B) in the same twisted pair. For absolute encoders, follow the bus recommendations for using the twisted pairs in the required cable type.
UL Listed

UL Listed Avtron encoders can be directly applied to any hazardous duty application which requires Class and Division, Class and Zone or AEX certification. Note that UL Listing is a different system than ATEX or IECEx. Ensure the model you select has the UL listing which meets the application requirements.

Related Products

AV115

XR45

HS40

AV44

Rating & review

See all reviews

Product Details

HS44

Description

Specifications

More Advantages

Markets & Applications

Light Mill Duty

Mill Duty

Heavy Mill Duty

Severe Mill Duty

Documents

Related Material

Competitive Products

Competitive Products

Related Products

Rating & review