The Model M185 Unipulser is a single pulse per revolution, zero speed (operational down to zero RPM) pulse generator which requires no coupling to the shaft for which rotational speed is being measured. The pulse generator consists of a magnet assembly which clamps around the shaft and a transducer assembly which mounts in proximity to the magnet assembly. Refer to the Outline Drawing for specific dimensional information.
The Model M185 is designed for applications where an end shaft is not available for coupling to other types of rotary pulse generators. When the M185 is used in conjunction with a speed measuring system like the Avtron Model K885, it is possible to measure roll surface speed to 0.01%, with a 1 second measurement period for any shaft speed from 60 to 3000 RPM.
The magnet assembly is supplied with an adjustable fastener and sufficient band material to accommodate shafts ranging in diameter from 2 inches to 9 inches. For smaller diameter shafts, a hose clamp (not included) with a 0.5 inch wide band may be used. For larger diameter shafts, longer lengths of band material are available from the factory.
Pulses Per Revolution (PPR): 1
Max Frequency Output: 50 Hz
Speed Range: 0 to 3000 RPM
Operating Temperature: 32°F to 150° F
Output Signal:
- Wave Shape: Square
- Volts Out High: Supply Volts
- Volts Out Low: 0.5 VDC Max @ 10 mA
- 1.2 K pull up
- 10 mA sink
Weight:
- Magnet Assembly: 1 oz.
- Transducer Assembly: 2.5 lbs
- Magnetoresistive Sensor gap up to 0.160" permitted
- Magnet ring can be added to existing shafts in place without the need to remove bearings or pillow blocks
| Industry | Mining | General | Wind Power | Pulp & Paper | Oil & Gas | Marine | Metals | Machinery | Crane & Hoist |
|---|---|---|---|---|---|---|---|---|---|
Light Mill DutyHS4 Encoder Programming Tool Cables and Connectors Encoder Couplings RUSH AV4 AV25 HS25A AV6A HS6A K661 AV6M AV4 HS35A AV20 |
|
||||||||
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No Related Materials Available
